The first step to be followed to prepare a boiler for internal and external inspection is?

The first step to be followed to prepare a boiler for internal and external inspection is?

A. isolate, drain and lock out boiler
B. ventilate enclosed spaces
C. notify boiler inspector
D. cool down boiler for entry



Answer: A

When isolating a motor for maintenance, you should

When isolating a motor for maintenance, you should

A. remove the fuses
B. install a lockout clamp on the breaker handle
C. place a DO NOT OPERATE tag on the breaker
D. do all of the above

Answer: D

In order to protect driven equipment from damage, the first step should be to?

In order to protect driven equipment from damage, the first step should be to?

A. Close the discharge valve
B. Place a lock on the drain valve
C. Isolate the driver
D. Remove the belts




Answer: C

After completing the isolation of equipment, you must

After completing the isolation of equipment, you must

A. Open the equipment drain valve
B. Close the equipment outlet valve
C. Notify the foreman
D. Enter the completed isolations in the log book





Answer: D

Ensuring the complete isolation of a piece of equipment prior to maintenance is the responsibility of the?

Ensuring the complete isolation of a piece of equipment prior to maintenance is the responsibility of the?

A. Plant Safety Committee
B. Operations Department
C. Operating and Maintenance Department
D. Maintenance Department




Answer: C

If a person is not sure a piece of equipment is safe to work on, they should?

If a person is not sure a piece of equipment is safe to work on, they should?

A. Ask the foreman if it is safe
B. Ask a qualified worker to indicate and explain the points of isolation
C. check with a co-worker before proceeding
D. rely fully on the permit information




Answer: B

What is the first step in isolating a steam boiler?

What is the first step in isolating a steam boiler?

A. Install a blind flange downstream of the fuel gas valve
B. Install a blind flange downstream of the feedwater isolation valve
C. Isolate motor for the forced draft fan
D. Install a blind flange upstream of the blowdown valve

Answer: C

A Blind Flange must contain what information?

A Blind Flange must contain what information?

A. Spacing to be installed, Date installed and by whom, Tag number
B. Operator, Location, Manufacturer information
C. Date removed and by whom, WHMIS label, Size of blind
D. Date installed and by whom, Contact information, Location




Answer: A

Where does "DO NOT OPERATE" tags go to?

Where does "DO NOT OPERATE" tags go to?

A. Controls
B. Valves
C. Steam Turbine
D. Pump



Answer: B

What is the first step in isolation of a Pump and Driver?

What is the first step in isolation of a Pump and Driver?

A. Close high pressure steam supply valve
B. Close the turbine low pressure steam exhaust
C. Open the turbine casing drain
D. Close the pump discharge valve



Answer: A

In situations where a explosion could occur in a pipe, what would be the best way of isolation?

In situations where a explosion could occur in a pipe, what would be the best way of isolation?

A. Bleed Assembly
B. Blind Flange
C. Double Block
D. All of the above




Answer: D

Valves must be secured in either closed or open positions using?

Valves must be secured in either closed or open positions using?

A. Blank flanges
B. Double block
C. Locked chains and wire seals




Answer: C

What devices are used to isolate piping and vessels?

What devices are used to isolate piping and vessels?

A. Valves
B. Blank flanges
C. All of the above



Answer: C