Environmental management program involves protection of the environment and _____ awareness.

Environmental management program involves protection of the environment and _____ awareness.

a. Private.
b. Individual.
c. Public.
d. Government.
e. Industrial.

Answer: C

Critical path planning is a:

Critical path planning is a:

a. Schedule drawn up to indicate the remaining operating hours of equipment
b. Method of scheduling maintenance work best suited for small plants
c. Method of scheduling maintenance outages for large plants
d. Method of determining plant output
e. Method of predicting the next equipment breakdown date.

Answer: C

Convenience assignment maintenance scheduling:

Convenience assignment maintenance scheduling:

a. Allows maintenance to be completed at the convenience of the production manager
b. Allows high pressure boiler inspections to be deferred to a three year schedule
c. Assigns maintenance work to be completed the next time the unit is out of operation for some other reason
d. Allows the maintenance staff to complete the maintenance at their convenience
e. Allows maintenance work to be completed on a semi-annual basis.

Answer: C

Priority scheduling dictates the work that must be done in a given sequence. First priority category would include:

Priority scheduling dictates the work that must be done in a given sequence. First priority category would include:

1. Safety of equipment and personnel
2. Painting of equipment
3. Replacement of damaged bearings
4. Replacement of ruptured lubricating line


a. 1, 2
b. 1, 3,4
c. 3, 4
d. 1, 2, 3,
e. 2.

Answer: B

Safety can be promoted and willingly adhered to by a combination of the following actions.

Safety can be promoted and willingly adhered to by a combination of the following actions.

1. Having, employees attend and participate in safety meetings
2. Keeping safety posters placed throughout the plant
3. Management and supervisors setting a good example
4. Imposing stiff fines on safety lax employees


a. 1, 2, 3, 4
b. 2, 3, 4
c. 1, 2, 3
d. 1, 3, 4
e. 2, 4.

Answer: C

One of the best methods of promoting safety is by:

One of the best methods of promoting safety is by:

a. Having employees attend safety lectures
b. Keeping safety posters placed throughout the plant
c. Setting a good example
d. Making an example of an employee who breaks safety rules or regulations
e. Enforcing safe workmanship.

Answer: C

The composition of a plant safety committee should be made from:

The composition of a plant safety committee should be made from:

a. Plant operators and maintenance personnel
b. Management, Boiler inspector and shop stewards
c. Municipal firemen and management
d. Municipal firemen, management, supervisors and operators
e. Management, supervisors, operators and laborers.

Answer: E

Critical path planning will indicate the:

Critical path planning will indicate the:

1. Man hours available to do the job
2. Trades people required too do the job
3. Tools required too complete the job
4. Parts required too complete the job


a. 1,2
b. 1,2,3
c. 1,3,4
d. 2,3,4
e. 1,2,3,4.

Answer: E

Which of the following is not a planning technique used in a steam plant:

Which of the following is not a planning technique used in a steam plant:

a. CPM.
b. C.E.T .
c. Arrow diagrams.
d. Decision tree methods.
e. Gantt charts.

Answer: B

On the job safety is the responsibility of:

On the job safety is the responsibility of:

a. The employee
b. The safety committee
c. The plant management
d. The employer
e. All of the above.

Answer: E

The responsibility for safety on the work-site falls upon the:

The responsibility for safety on the work-site falls upon the:

1. Employee
2. Safety committee
3. Plant management
4. Provincial inspector


a. 1, 2, 3, 4
b. 1,2,4
c. 1,2,3
d. 1,3,4
e. 1, 3.

Answer: C

The purpose of a review of a plan is to:

The purpose of a review of a plan is to:

1. Gain experience.
2. Recommend changes for the next time.
3. Inform other people of various problems.
4. Make a report as part of the continuous planning program.


a. 1,2
b. 2,3
c. 1,3,4
d. 2,3,4
e. 1,2,3,4.

Answer: E

Gantt charts are used to plan:

Gantt charts are used to plan:

1. Shift schedules.
2. Large and long overalls.
3. Holiday schedule.
4. Day to day operation of the plant.



a. 1,3
b. 1,2
c. 2,3,4
d. 1,2,3
e. 1,2,3,4.

Answer: D

If a plan gets off schedule you might have to:

If a plan gets off schedule you might have to:

1. Check to see that the plan is being followed.
2. Remove non-critical items from the plan.
3. Work overtime.
4. Re-schedule certain events.


a. 1,2,3
b. 1,2,3,4
c. 1,3,4
d. 2,3,4
e. 1,2,4.

Answer: B

Industrial health and safety committees are established to:

Industrial health and safety committees are established to:

a. See that boilers are inspected as required.
b. Comply with boiler insurance companies.
c. Satisfy Worker's Compensation Board requirements.
d. Comply with local Fire Marshall Regulations.
e. Satisfy the Provincial Safety Codes Act.

Answer: C

Records are kept in a steam plant for which of the following reasons:

Records are kept in a steam plant for which of the following reasons:

1. Legal requirements.
2. Supervisory requirements.
3. Analysis and decision making requirements.
4. Financial requirements.


a. 1,2
b. 1,3,4
c. 2,3,4
d. 1,2,3,4
e. 1,2,3.

Answer: B

Gantt charts used in planning techniques are used for showing:

Gantt charts used in planning techniques are used for showing:

1. Total time scheduled for a job.
2. Work done compared with work schedule.
3. Work completed.
4. Start of work.


a. 1,2
b. 2,3,4
c. 3,4
d. 1,2,3,4
e. 1,2,3.

Answer: D

At a power plant, a certain amount of record keeping is mandatory. This record keeping is carried out in order to comply with the:

At a power plant, a certain amount of record keeping is mandatory. This record keeping is carried out in order to comply with the:

1. Provincial Boilers and Pressure Vessels Act and Regulations.
2. Rules of the Provincial Worker's Compensation Board.
3. ASME codes.
4. Insurance companies.


a. 1, 2, 3
b. 1, 2, 4
c. 2, 3, 4
d. 1,2
e. 3, 4.

Answer: B

A Third Class Chief Engineer should be familiar with the following maintenance management areas:

A Third Class Chief Engineer should be familiar with the following maintenance management areas:

1. Preventative maintenance.
2. Management information system.
3. Work order system.
4. Planning and scheduling work.


a. 1, 2, 3
b. 1, 3, 4
c. 2, 3, 4
d. 1,2
e. 3, 4.

Answer: B

With regard to power plants, insurance companies require, among other things, that:

With regard to power plants, insurance companies require, among other things, that:

a. Water treatment sheets be provided to them monthly.
b. The purchase of lubricants be limited to one brand only.
c. Machinery claims are promptly filed.
d. Only registered nurses serve as first aid personnel.
e. Safety committees be fully operational.

Answer: C