A proportional controller:
a. Is also called a multi-position controller
b. Provides a proportional output based on the error between process variable and set-point
c. Does not allow operator input
d. Provides on-off control
e. Allows the process variable to always be maintained at the set-point
Answer: B
Learn More :
Power Engineering Chapter 86
- A valve actuator
- When a recorder receives a signal from a transmitter, the recorder incorporates a
- A proportional only controller
- The output pressure signal of a transmitter relay is usually
- A flapper-nozzle assembly is basic to all
- On a basic pneumatic transmitter, a movement of the flapper towards nozzle will:
- Putting a controller on manual control means:
- A valve which gives good throttling action, takes less actuator force, but does not seal well is a:
- A proportional-only controller:
- Most solenoid valves operate so that the upstream line pressure will:
- Cascade control utilizes:
- A circular chart recorder:
- A sensing element sends its signal to
- A CRT or LCD display trend recorder
- A CRT trend display:
- A pneumatically actuated control valve which opens on air failure has a:
- A recorder utilizing a spiral Bourdon tube will have a pen movement:
- Normally-closed solenoid operated valves open when
- In a pneumatic control system, the nozzle receives a regulated air supply pressure of approximately:
- A control valve that has one plug that moves upward to close the port is called:
- A two-position controller compares conditions to a set point and:
- Integral and Derivative functions
- When controller output is proportional to the amount of deviation, the controller is:
- A valve body that seals on the down stroke is: