The purpose of the vacuum unit in an oil refinery is
a) to receive the "reduced crude" and recover more gas oils by further distilling under high temperature and low pressure
b) to only take off the propane, butane, and light ends from the crude oil
c) the same as the fluid catalytic cracking unit
d) to remove the hydrogen sulphide and nitrogen from the naphtha
e) to remove the sulphur and nitrogen from the diesel
Answer: A
Learn More :
Power Engineering Chapter 143
- A diesel hydrotreater in an oil refinery
- Which of the following is not a steam user in a meat processing plant?
- The main disadvantage of a sawmill gangsaw is
- A process used in refineries to separate components by using the property of different boiling temperatures is:
- The vacuum unit in an oil refinery:
- In a meat processing plant hot water for knife sanitization is maintained at a temperature of approximately:
- In a Fluid catalytic cracker;
- If the logs coming into a sawmill must be shortened, they are cut with a _____ saw.
- The purpose of the reformer in an oil refinery is to:
- Kiln dried lumber refers to drying lumber:
- A _____ saw consists of as many as 40 parallel saws arranged in a moveable sash mounted in a heavy steel frame.
- A gas sweetening unit in an oil refinery uses:
- The overall purpose of an oil refinery are to:
- The purpose of the fluid catalytic cracking unit (FCCU) in an oil refinery is to:
- In a meat processing plant the blast freezer is maintained at a temperature of approximately:
- The purpose of the naphtha hydrotreater in an oil refinery is to:
- In a meat processing plant the sales cooler is maintained at a temperature of approximately:
- In an oil refinery, it is important to:
- Hog fuel is a term used to describe:
- The two types of wood pulping processes are the mechanical and the
- The purpose of dehydration in natural gas treatment plants is
- The purpose of stabilization in natural gas treatment plants is
- The authority charged with responsibility for drafting regulations to cover the use of natural gas is the
- Chipping in a pulp mill is done to prepare the logs for: