Which ASME code states "If the water level is above the visible range of the gauge glass, shut off the feed water,fuel, and combustion air in that order."

Which ASME code states "If the water level is above the visible range of the gauge glass, shut off the feed water,fuel, and combustion air in that order."

A. Section I
B. Section II
C. Section VI
D. Section VII
E. Section VIII

Answer: D

High water level is usually caused by?

High water level is usually caused by?

A. Defective level control system
B. Defective feedwater pump
C. Defective valve
D. All of the above
E. B and C

Answer: A

Which ASME code states "If the water level is below the gauge glass, the safest and most conservative action is to shut off fuel and air, but continue to feed water slowly until the normal water level is restored"

Which ASME code states "If the water level is below the gauge glass, the safest and most conservative action is to shut off fuel and air, but continue to feed water slowly until the normal water level is restored"

A. Section I
B. Section II
C. Section VI
D. Section VII
E. Section VIII

Answer: D

If the operator is unable to see the water level in the gauge glass, what should be done?

If the operator is unable to see the water level in the gauge glass, what should be done?

A. Shut down the boiler
B. Check the level by opening the drain on the glass
C. Continue firing and add water to see if the water level rises
D. Notify the chief engineer before responding to the condition

Answer: B

The boiler should be at __%(or more) of maximum when sootblowers are in service.

The boiler should be at __%(or more) of maximum when sootblowers are in service.

A. 90
B. 70
C. 80
D. 60
E. 50

Answer: E

Soot Blowers should be operated

Soot Blowers should be operated

A. Weekly
B. Monthly
C. Once a shift
D. Annually
E. Semi-Annually

Answer: C